|
|
Transmitter and receiver for remote data transmission
Zimčík, Václav ; Toman, Marek (referee) ; Huták, Petr (advisor)
Bachelor thesis is focused on the construction of a multichannel thermometer with wireless data transmission. The device will be able to receive data from multiple transmitters, to which multiple temperature sensors will be connected, to one receiver by wireless transmission at a frequency of 433MHz, and then the device will display this data on a display using selected components and algorithm.
|
|
|
Heat exchanger with a combined condensation
Janovský, Jakub ; Kořista, Milan (referee) ; Pospíšil, Jiří (advisor)
The diploma thesis named Heat exchanger with a combined condensation deals with design of the heat exchanger with a combined condensation. The first part is a brief research about direct-contact heat exchangers. The next part describes physical principles of direct-contact heat transfer mechanisms and a method of calculation is proposed. After that the bundle with basic dimension of heat exchanger is designed. The mixing chamber is designed based on these dimension. Technical documentation of a heat exchanger with combined condensation is an integral part of the thesis.
|
|
|
Design of Device for Vehicle Center of Gravity Height Measurement
Rektořík, Jiří ; Vančura, Jan (referee) ; Hejtmánek, Petr (advisor)
The objective of this diploma thesis is the design of a device that measures the vehicle’s centre of gravity height position. The first part defines individual methods of measurement using various measuring equipment. The next part deals with the definition of requirements for the device and the definition of the design. A stress-strain analysis was executed for selected components. This diploma thesis describes the preparation process of the vehicle and the device for the measurement. The next part is dedicated to the design of the measuring chain and to the evaluation of the results. The thesis concludes with a theoretic analysis of the measurement inaccuracy.
|
|
|
Design of a measuring equipment for distance sensors calibration
Zindler, Lukáš ; Sámelová, Vendula (referee) ; Štěpánek, Vojtěch (advisor)
This study aimed deals with the design of a calibration equipment for an inductive distance sensor. The theoretical part provides a basic overview of metrology and the state of knowledge in the field of sensors. In the practical part, several concepts of measuring equipment are suggested, a suitable calibration equipment is selected and assembled, and at last the compensation of the systematic error of the sensor is performed.
|
|
|
Design of a measuring equipment for distance sensors calibration
Zindler, Lukáš ; Sámelová, Vendula (referee) ; Štěpánek, Vojtěch (advisor)
This study aimed deals with the design of a calibration equipment for an inductive distance sensor. The theoretical part provides a basic overview of metrology and the state of knowledge in the field of sensors. In the practical part, several concepts of measuring equipment are suggested, a suitable calibration equipment is selected and assembled, and at last the compensation of the systematic error of the sensor is performed.
|
|
|
Transmitter and receiver for remote data transmission
Zimčík, Václav ; Toman, Marek (referee) ; Huták, Petr (advisor)
Bachelor thesis is focused on the construction of a multichannel thermometer with wireless data transmission. The device will be able to receive data from multiple transmitters, to which multiple temperature sensors will be connected, to one receiver by wireless transmission at a frequency of 433MHz, and then the device will display this data on a display using selected components and algorithm.
|
|
|
Design of Device for Vehicle Center of Gravity Height Measurement
Rektořík, Jiří ; Vančura, Jan (referee) ; Hejtmánek, Petr (advisor)
The objective of this diploma thesis is the design of a device that measures the vehicle’s centre of gravity height position. The first part defines individual methods of measurement using various measuring equipment. The next part deals with the definition of requirements for the device and the definition of the design. A stress-strain analysis was executed for selected components. This diploma thesis describes the preparation process of the vehicle and the device for the measurement. The next part is dedicated to the design of the measuring chain and to the evaluation of the results. The thesis concludes with a theoretic analysis of the measurement inaccuracy.
|
|
|
Heat exchanger with a combined condensation
Janovský, Jakub ; Kořista, Milan (referee) ; Pospíšil, Jiří (advisor)
The diploma thesis named Heat exchanger with a combined condensation deals with design of the heat exchanger with a combined condensation. The first part is a brief research about direct-contact heat exchangers. The next part describes physical principles of direct-contact heat transfer mechanisms and a method of calculation is proposed. After that the bundle with basic dimension of heat exchanger is designed. The mixing chamber is designed based on these dimension. Technical documentation of a heat exchanger with combined condensation is an integral part of the thesis.
|
guest ::
